2024 SANY® Backhoe Loader SLB95

MoreLess
Limited Time Offer!

Selling Price -

2023 SANY® Backhoe Loader SLB95 17,637 LBS

Agile and simple to operate, SANY’s backhoe loader is a tool carrier optimized for a variety of applications. It puts the power in your hands with the advantage of multi-purpose performance and greater versatility plus the ability to move from site to site without a trailer. The SLB95 is an all-around reliable workhorse.

Features may include:

  • 4WD Powershift Transmission with Limited Slip Differential and Drive Shaft Guard
  • Flip-Over Pads, Outrigger Cylinder Guards and Front Bumpers
  • Load Sensing Hydraulic with Pilot Controls and ISO/SAE Pattern Change
  • Eight LED Working Lights, Rotating Beacon, Traffic Lights, Air Suspension Seats, and 3? Retractable Seatbelt
  • Boom Float, Return to Dig, and Breaker Line
  • ROPS/FOPS Certified (ISO-3471, ISO-27850, ISO-3449)
  • 2024
  • SANY®
  • Backhoe Loader
  • SLB95
  • General
  • Deutz TCD3.6-L4 - Low Maintenance T4F
  • 3.6 L (220 in³)
  • Gross: 73.8 kW @ 2,200 rpm (99 hp @ 2,200 rpm) | Net: 70.8 kW @ 2,200 rpm (95 hp @ 2,200 rpm) | Hydraulic: 39 kW @ 2,200 rpm (52.3 hp @ 2,200 rpm)
  • 410 Nm @ 1,600 rpm (302.4 lbs-ft @ 1,600 rpm)
  • ZF 4WD — 4 Speed Forward/Reverse
  • Speed Gear 1: 4.8 km/hr (3 mph) | Speed Gear 2: 9.6 km/hr (6 mph) | Speed Gear 3: 19.3 km/hr (12 mph) | Speed Gear 4: 35.4 km/hr (22 mph)
  • Kawasaki Variable Displacement—Axial Piston
  • Load Sensing with Pilot Controls
  • System: 156 l/min (41.2 gal/min) | One-way Aux Line Max Flow: 79.4 l/min (21 gal/min)
  • 24.9 MPa (3,625 psi) | One-way Aux Line Max Pressure: 14.5 MPa 2,103 psi
  • Bucket Breakout Force—Excavator: 55 kN (12,354 lbf) | Bucket Breakout Force—Loader: 50 kN (11,240 lbf)
  • Maximum Reach from Center of Swing Pivot: 5,671 mm (18' 7") | Dump Clearance: 2,700 mm (8' 10") | Reach at Dump Position: 730 mm (2' 5") | Bucket Rollback Angle @ Ground Level: 40º | Bucket Rollback Angle @ Full Height: 51º | Loader Dump Angle @ Full Height: 44º
  • 7,381 mm (24' 3")
  • 2,280 mm (7' 6")
  • 3,732 mm (12' 3")
  • Cab: 3,129 mm (10' 3") | Maximum Digging: 5,370 mm (17' 7") | Maximum Height to Bucket Hinge Pin: 3,478 mm (11' 5") | Maximum Operating: 4,293 mm (14' 1")
  • Minimum: 320 mm (1' 1")
  • From Axle to Axle: 2,245 mm (7' 4")
  • Rear: 1,780 mm (5' 10")
  • Front Tires: 4,240 mm (13' 11") | Front Bucket: 4,800 mm (15' 9")
  • Stabilizer: 3,491 mm (11' 5")
  • 4,332 mm (14' 3") | Maximum Digging Depth with Bucket Leveled: 88 mm (3")
  • 140.0 L (37.0 gal) | DEF Tank: 10.0 L (2.6 gal)
  • Hydraulic: 120.0 L (31.7 gal) | Engine: 8.5 L (2.2 gal) | Gearbox: 18.0 L (4.8 gal)
  • 20.0 L (5.3 gal)
  • Operating (Cab + Attachments): 8,040 kg (17,725 lbs) | Operating (Canopy + Attachments): 7,880 kg (17,372 lbs) | Operating (Cab, no attachments): 7,540 kg (16,623 lbs) | Operating (Canopy, no attachments): 7,360 kg (16,226 lbs)
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • Starke
  • New
  • In Stock
  • 2024
  • SANY®
  • Backhoe Loader SLB95
  • 95
  • ZF 4WD — 4 Speed Forward/Reverse
  • Diesel
  • Available
  • Cab: 3,129 mm (10' 3") | Maximum Digging: 5,370 mm (17' 7") | Maximum Height to Bucket Hinge Pin: 3,478 mm (11' 5") | Maximum Operating: 4,293 mm (14' 1")
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.