2026 SANY® Wheel Loaders SW405K

Information

2026 SANY® Wheel Loaders SW405K

SW405K

The SW405K5 is a heavy-duty 4-yard machine with a 20-ton operating weight that pairs a 228-hp Deutz engine and Z-bar linkage to generate 40,466?lbf of breakout force with a 7-ton payload and a 4.2?yd³ bucket. Standard ride control and variable-displacement load-sensing hydraulics smooth out bumpy travel and deliver responsive performance. Operators get a roomy ROPS/FOPS cab with a 360-degree camera, keyless start, heated air-ride seat and large digital monitor, while owners enjoy the peace of mind from SANY EVI telematics and a 5-year/5,000-hour warranty.

Features may include:

  • The 228-net horsepower with almost 40,000 lbs of breakout force and bucket capacity of 4 cubic yards
  • Tight turning radius coupled with fast cycle times with return to dig functionality means you’ll spend more time working and less time maneuvering.
  • Keep more material in the bucket with the SANY boom suspension
  • Time-tested components such as the Eaton load sensing steering valve, Dana axles and brakes

Photos

Highlights

  • Deland, Florida
  • 2026
  • SANY®
  • Wheel Loaders SW405K
  • TCD6.1
  • Shift Modes: Automatic, Manual, Kick Down ¦ Forward Gear 1-4: 4–25 mph / Reverse Gear 1-4: 4–16 mph
  • Available
  • 7' 3" (2,200 mm)
  • To Top of Cab: 11' 9" (3,580 mm)│Max. Dump: 17' 9" (5,415 mm) │Hinge Pin at Max. Lift: 13' 7" (4,145 mm)

Specifications

  • 2026
  • SANY®
  • Wheel Loaders
  • SW405K
  • General
  • TCD6.1
  • Deutz
  • Max Gross: 262 hp / Net: 228 hp
  • Gross: 965 lbs ft
  • 476 in3
  • Shift Modes: Automatic, Manual, Kick Down ¦ Forward Gear 1-4: 4–25 mph / Reverse Gear 1-4: 4–16 mph
  • Service: Wet Disc ¦ Parking: Disk Brake
  • Raise: 5.4 sec / Dump: 1.9 sec / Float Down: 3.3 sec / Total Cycle Time: 10.6 sec
  • Bucket Capacity: 4.0 yd3 ¦ Breakout Force: 40,466 lbf
  • 4,061 PSI
  • Max: 81 GP
  • Clearance (full lift 45º dump): 10' 2"│ Reach (full lift 45º dump): 3' 11"│ Center Line of Rear Axle to Edge of Counterweight: 7' 8" (2,335 mm) │Center Line of Front Axle to Center Pivot: 5' 3" (1,600 mm)" │ Dump Clearance at Max. Lift: 10' 2" (3,090 mm) │Reach at Max. Lift and 45º Discharge: 3' 11" (1,185 mm) │Roll Back at Max. Lift: 58º │ Dump Angle at Max. Lift and Dump: 45º│ Roll Back at Carry Height: 50º │ Roll Back at Ground: 45º│Tail Angle to the Rear Wheel: 27º │ Clearance Circle to Outside of Tires: 18.6" (5,635 mm) │ Clearance Circle to Counterweight: 19' 5" (5,911 mm)│ Max. Circle: 21' 3" (6,465 mm)
  • To Top of Cab: 11' 9" (3,580 mm)│Max. Dump: 17' 9" (5,415 mm) │Hinge Pin at Max. Lift: 13' 7" (4,145 mm)
  • Shipping without Attachments: 23' 1" (7,040 mm) / With Bucket: 26' 10" (8,180 mm)
  • 7' 3" (2,200 mm)
  • 1' 5" (430 mm)
  • 10' 6" (3,200 mm)
  • Dig Level Bucket: 1.2" (30 mm)
  • Tank: 79.3 gal
  • Tipping Straight: 31,967 lbs/ @ Full Term: 28,881 lbs
  • 11.4 gal ¦ Engine Crankcase: 6.1 gal
  • 9.2 gal
  • 7.4 gal
  • 7.4 gal
  • Tank: 76.6 gal / DEF Tank: 5.3 gal
  • Operating: 40,786 lbs lbs
  • Front Axle: Fixed ¦Traction Aid: Manual Differential Lock ¦ Rear Axle: Oscillating ¦ Traction Aid: Open Differential